Item No.:H12-NS3-Z-BB108
3 led 1.08W SMD5630 blue led Injection modules
Features
Ø Simple appearance design without losing stylish and elegant
Ø High efficiency Samsung SMD chip
Ø Reverse voltage, current protection design
Ø High luminosity , low light decay and even brightness
Ø 150° better emitting angle through a CAP TYPE Optical switching Lens
Ø IP67 waterproof rating by ultrasonic welding technology
Ø 20 AWG tinned copper wire getting a low thermal resistance
Ø Max.20 units in series , and each unit cuttability
Ø Safety, energy saving and Eco-friendly
Ø CE and RoHs approved
Typical Applications
Ø Channel letters
Ø Advertising letters
Ø Decorative lighting
Ø Sign and signage and light boxillumination
Ø Replaces neon/fluorescent lighting
Product parameters
LED chip brand
|
Samsung
|
Chip size
|
5630
|
Operating voltage
|
DC 12V
|
Power dissipation
|
1.08W
|
Emitting angle
|
150°
|
Luminous intensity
|
15Lm（typ.）
|
Dimension
|
66*15.8*7.5 mm （L x W x H）
|
LED quantity
|
3 pcs
|
Emitting color
|
Blue
|
Waterproofing rate
|
IP67
|
IP type
|
Injection workmanship
|
Material of main cabinet
|
Silica gel Flame retardant
|
Material of Lens
|
Optical PC material
|
Color of main Cabinet
|
Blue
|
Material of connecting cable
|
UL 20 AWG， 300V/80°C
|
Color of connecting cable
|
Positive: red; negative: white
|
Max. In series
|
20pcs
|
Adhesive type
|
3M adhesive Sponge
|
Operating temperature
|
-30~85℃
|
Storage temperature
|
-40~100℃
|
Warranty
|
2 years
|
Product dimension drawing (unit: mm)
Product installation instructions
Notes
Ø Standardcascade quantity of the DC 12V model is 20 pieces in a series
Ø It shouldbe separated of end collecting joints by insulative tape to avoid a short
Product applicationnotes
Ø
Don`t stick the surface of the light by sharp tools.
Don`t stick the surface of the light by sharp tools.
Ø Don`t fix this product by sour glassglue or other soured adhesion;don`t operate or store this product in sourenvironment or the light will be vulcanized and the life span of the productwill be reduced.
Ø Drive this product by 12V DC switchpower supply, and the power should be suitable for the quantity of the ledmodules; do not connect this product to the utility directly, or the productwill be burnt up.
Ø The total power of the led modules inseries should be lower than 80% of the power of the driver, or the power supplywill be burnt up probably,select the suitable thickness of the connecting cablein terms of the quantity of modules, and the connecting points should bewrapped by electrical tape.
Ø The maximum cascade quantity ofDC12/24V product are 50 pieces in a series(the Power Voltage Supply type of 36VDC and above can be higherquantity in series ), and the brightness of the two ends will be differentbecause of the voltage loss when you increase the quantity of the module.
More detail parameters pls contact E-MAIL:Info@ledyyh.com
No comments:
Post a Comment