2835 white high-power one-led injection module(waterproof)

Item No.:H12-NS1-U-DW130

2835 white high-power one-led injection module(waterproof)

Features

---

Ø  Simple appearance design without losing stylish and elegant

Ø  High efficiency Samsung SMD chip

Ø  Reverse voltage, current protection design

Ø  High luminosity , low light decay and even brightness

Ø  150° better emitting angle through a CAP TYPE Optical switching Lens

Ø  IP67 waterproof rating by ultrasonic welding technology    

Ø  20 AWG tinned copper wire getting a low thermal resistance

Ø  Max.20 units in series , and each unit cuttability

Ø  Safety, energy saving and Eco-friendly

Ø  CE and RoHs approved

Typical Applications

---

Ø  Channel letters

Ø  Advertising letters

Ø  Decorative lighting

Ø  Sign and signage and light boxillumination

Ø  Replaces neon/fluorescent lighting

Product parameters

---

LED chip brand	Samsung
Chip size	2835
Operating voltage	DC  12V
Power dissipation	1.3W
Emitting angle	120°
Luminous intensity	130Lm（typ.）
Dimension	49*31.2*7.7  mm （L x W x H）
LED quantity	1 pcs
Emitting color	White
Waterproofing rate	IP67
IP type	Injection workmanship
Material of main cabinet	ABS  inflaming retarding
Material of Lens	Optical  PC material
Color of main Cabinet	White
Material of connecting cable	UL  20 AWG，  300V/80°C
Color of connecting cable	Positive:  red; negative: white
Max. In series	20pcs
Adhesive type	3M adhesive Sponge
Operating temperature	-30~85℃
Storage temperature	-40~100℃
Warranty	2  years

---

Product dimension drawing (unit: mm)

Product installation instructions

---

Notes

Ø  Standardcascade quantity of the DC 12V model is 20 pieces in a series

Ø  It shouldbe separated of end collecting joints by insulative tape to avoid a short

Product applicationnotes

---

Ø  
Don`t stick the surface of the light by sharp tools.

Ø  Don`t fix this product by sour glassglue or other soured adhesion;don`t operate or store this product in sourenvironment or the light will be vulcanized and the life span of the productwill be reduced.

Ø  Drive this product by 12V DC switchpower supply, and the power should be suitable for the quantity of the ledmodules; do not connect this product to the utility directly, or the productwill be burnt up.

Ø  The total power of the led modules inseries should be lower than 80% of the power of the driver, or the power supplywill be burnt up probably,select the suitable thickness of the connecting cablein terms of the quantity of modules, and the connecting points should bewrapped by electrical tape.

Ø  The maximum cascade quantity ofDC12/24V product are 50 pieces in a series(the Power Voltage Supply type of 36VDC and above can be higherquantity in series ), and the brightness of the two ends will be differentbecause of the voltage loss when you increase the quantity of the module.

---

More detail parameters pls contact E-MAIL:Info@ledyyh.com

- See more at: http://www.ledmodules.net/product/1/240.html#sthash.iXMFDinC.dpuf

3535 white high-power one-led injection module(waterproof)

Item No.:H12-NS1-T-EW280

3535 white high-power one-led injection module(waterproof)

Features

---

Ø  Simple appearance design without losing stylish and elegant

Ø  High efficiency Samsung SMD chip

Ø  Reverse voltage, current protection design

Ø  High luminosity , low light decay and even brightness

Ø  150° better emitting angle through a CAP TYPE Optical switching Lens

Ø  IP67 waterproof rating by ultrasonic welding technology    

Ø  20 AWG tinned copper wire getting a low thermal resistance

Ø  Max.20 units in series , and each unit cuttability

Ø  Safety, energy saving and Eco-friendly

Ø  CE and RoHs approved

Typical Applications

---

Ø  Channel letters

Ø  Advertising letters

Ø  Decorative lighting

Ø  Sign and signage and light boxillumination

Ø  Replaces neon/fluorescent lighting

Product parameters

---

LED chip brand	Samsung
Chip size	3535
Operating voltage	DC  12V
Power dissipation	2.8W
Emitting angle	55°
Luminous intensity	330Lm（typ.）
Dimension	43.5*36.6*13mm  （L x W x H）
LED quantity	1 pcs
Emitting color	White
Waterproofing rate	IP67
IP type	Injection workmanship
Material of main cabinet	ABS  inflaming retarding
Material of Lens	Optical  PC material
Color of main Cabinet	White
Material of connecting cable	UL  20 AWG，  300V/80°C
Color of connecting cable	Positive:  red; negative: white
Max. In series	20pcs
Adhesive type	3M adhesive Sponge
Operating temperature	-30~85℃
Storage temperature	-40~100℃
Warranty	2  years

Product dimension drawing (unit: mm)

---

Product installation instructions

---

Notes

Ø  Standardcascade quantity of the DC 12V model is 20 pieces in a series

Ø  It shouldbe separated of end collecting joints by insulative tape to avoid a short

Product applicationnotes

---

Ø  
Don`t stick the surface of the light by sharp tools.

Ø  Don`t fix this product by sour glassglue or other soured adhesion;don`t operate or store this product in sourenvironment or the light will be vulcanized and the life span of the productwill be reduced.

Ø  Drive this product by 12V DC switchpower supply, and the power should be suitable for the quantity of the ledmodules; do not connect this product to the utility directly, or the productwill be burnt up.

Ø  The total power of the led modules inseries should be lower than 80% of the power of the driver, or the power supplywill be burnt up probably,select the suitable thickness of the connecting cablein terms of the quantity of modules, and the connecting points should bewrapped by electrical tape.

Ø  The maximum cascade quantity ofDC12/24V product are 50 pieces in a series(the Power Voltage Supply type of 36VDC and above can be higherquantity in series ), and the brightness of the two ends will be differentbecause of the voltage loss when you increase the quantity of the module.

---

More detail parameters pls contact E-MAIL:Info@ledyyh.com

- See more at: http://www.ledmodules.net/product/1/238.html#sthash.1kIwIMwU.dpuf

Requirements during using outdoor LED module

LED module is to array the luminous diode according to certain rules,then encapsulation,adding  waterproof process,that is called LED module.The application of LED module is extensive,so do you know any attention needs to be noted during using LED module (for LED module classification,click <<Classification of LED module >> ).

First,the normal LED module use 3 LEDs,5 LEDs,6 LEDs ,they need to output by constant switching power supply,so be note whether open the switching power supply when installate the channel letters,be sure not connect outdoor LED modules to 220V voltage directly,or it will be burnt.

Second,To avoid switching power supply long time overload working,the best load power of switching power supply and LED module is 1:0.8,by this ratio,the operating time of outdoor LED module will be longer.

Third,if exceed 25 series ,it should be connected separately, then parallel them with high quality copper wire,power line should not be too long , remember to cut redundant wire in module end and stick firmly,avoid short out.

Above editor conclude several requirements needs to be noted when using outdoor LED module,please use it properly.

- See more at: http://www.ledmodules.net/news/Industry/239.html#sthash.h6EbYOSx.dpuf

How to use LED Injection Modules properly

LED Injection Modules was used to display AD letters and night signages,not only take advantage in night time,but also in daytime.When night falls,LED lighting module brings it’s gorgeous lights,that makes visible for customers from distance  ( out door LED module operating requirements,click << Key knowledge point of LED module

>>).

So how to use led sign module properly ?that’s also the way to ensure security and operating time .Currently used channel letter light source,usually input the voltage by regular settings ,normal types are DC12V 3LED,5LED,6LED,,needs putting out by constant voltage power driver.So pay attention to open and close the driver when installation,remember not connect 220V AC,or LED will be burnt.

Second is to use it properly ,don’t work overload ,load power ratio of switching power supply shoud be 1:0.8.If exceed 25 series ,it should be separated and connect,then parallel them with copper wire which is bigger than 1.5 SQMM.

Third,visibility between modules should be around 5m,to ensure the enough brightness.

Fourth,pay attention to voltage decreasing problem,try paralleling some return circuit,distribute voltage and current properly,avoid inconformity of brightness and burn the PCB because of too big single current.

- See more at: http://www.ledmodules.net/news/Industry/237.html#sthash.rQ0Tu8pY.dpuf

3 led 1.08W SMD5630 blue led Injection modules

　　

Item No.:H12-NS3-Z-BB108

3 led 1.08W SMD5630 blue led Injection modules

Features

---

Ø  Simple appearance design without losing stylish and elegant

Ø  High efficiency Samsung SMD chip

Ø  Reverse voltage, current protection design

Ø  High luminosity , low light decay and even brightness

Ø  150° better emitting angle through a CAP TYPE Optical switching Lens

Ø  IP67 waterproof rating by ultrasonic welding technology    

Ø  20 AWG tinned copper wire getting a low thermal resistance

Ø  Max.20 units in series , and each unit cuttability

Ø  Safety, energy saving and Eco-friendly

Ø  CE and RoHs approved

Typical Applications

---

Ø  Channel letters

Ø  Advertising letters

Ø  Decorative lighting

Ø  Sign and signage and light boxillumination

Ø  Replaces neon/fluorescent lighting

Product parameters

---

LED chip brand	Samsung
Chip size	5630
Operating voltage	DC  12V
Power dissipation	1.08W
Emitting angle	150°
Luminous intensity	15Lm（typ.）
Dimension	66*15.8*7.5  mm （L x W x H）
LED quantity	3 pcs
Emitting color	Blue
Waterproofing rate	IP67
IP type	Injection workmanship
Material of main cabinet	Silica  gel Flame retardant
Material of Lens	Optical  PC material
Color of main Cabinet	Blue
Material of connecting cable	UL  20 AWG，  300V/80°C
Color of connecting cable	Positive:  red; negative: white
Max. In series	20pcs
Adhesive type	3M adhesive Sponge
Operating temperature	-30~85℃
Storage temperature	-40~100℃
Warranty	2  years

Product dimension drawing (unit: mm)

---

Product installation instructions

---

Notes

Ø  Standardcascade quantity of the DC 12V model is 20 pieces in a series

Ø  It shouldbe separated of end collecting joints by insulative tape to avoid a short

Product applicationnotes

---

Ø  
Don`t stick the surface of the light by sharp tools.

Ø  Don`t fix this product by sour glassglue or other soured adhesion;don`t operate or store this product in sourenvironment or the light will be vulcanized and the life span of the productwill be reduced.

Ø  Drive this product by 12V DC switchpower supply, and the power should be suitable for the quantity of the ledmodules; do not connect this product to the utility directly, or the productwill be burnt up.

Ø  The total power of the led modules inseries should be lower than 80% of the power of the driver, or the power supplywill be burnt up probably,select the suitable thickness of the connecting cablein terms of the quantity of modules, and the connecting points should bewrapped by electrical tape.

Ø  The maximum cascade quantity ofDC12/24V product are 50 pieces in a series(the Power Voltage Supply type of 36VDC and above can be higherquantity in series ), and the brightness of the two ends will be differentbecause of the voltage loss when you increase the quantity of the module.

---

More detail parameters pls contact E-MAIL:Info@ledyyh.com

- See more at: http://www.ledmodules.net/product/1/229.html#sthash.tqX7MMBu.dpuf

3 led 0.9W SMD5630 White led Injection modules

　　

Item No.:H12-NS3-Y-BW090

3 led 0.9W SMD5630 White led Injection modules

Features

---

Ø  Simple appearance design without losing stylish and elegant

Ø  High efficiency Samsung SMD chip

Ø  Reverse voltage, current protection design

Ø  High luminosity , low light decay and even brightness

Ø  150° better emitting angle through a CAP TYPE Optical switching Lens

Ø  IP67 waterproof rating by ultrasonic welding technology    

Ø  20 AWG tinned copper wire getting a low thermal resistance

Ø  Max.20 units in series , and each unit cuttability

Ø  Safety, energy saving and Eco-friendly

Ø  CE and RoHs approved

Typical Applications

---

Ø  Channel letters

Ø  Advertising letters

Ø  Decorative lighting

Ø  Sign and signage and light boxillumination

Ø  Replaces neon/fluorescent lighting

Product parameters

---

LED chip brand	Samsung
Chip size	5630
Operating voltage	DC  12V
Power dissipation	0.9W
Emitting angle	120°
Luminous intensity	100Lm（typ.）
Dimension	76.5*13*5.5  mm （L x W x H）
LED quantity	3 pcs
Emitting color	White
Waterproofing rate	IP67
IP type	Injection workmanship
Material of main cabinet	Silica  gel Flame retardant
Material of Lens	Optical  PC material
Color of main Cabinet	White
Material of connecting cable	UL  20 AWG，  300V/80°C
Color of connecting cable	Positive:  red; negative: white
Max. In series	20pcs
Adhesive type	3M adhesive Sponge
Operating temperature	-30~85℃
Storage temperature	-40~100℃
Warranty	2  years

Product dimension drawing (unit: mm)

---

Product installation instructions

---

Notes

Ø  Standardcascade quantity of the DC 12V model is 20 pieces in a series

Ø  It shouldbe separated of end collecting joints by insulative tape to avoid a short

Product applicationnotes

---

Ø  
Don`t stick the surface of the light by sharp tools.

Ø  Don`t fix this product by sour glassglue or other soured adhesion;don`t operate or store this product in sourenvironment or the light will be vulcanized and the life span of the productwill be reduced.

Ø  Drive this product by 12V DC switchpower supply, and the power should be suitable for the quantity of the ledmodules; do not connect this product to the utility directly, or the productwill be burnt up.

Ø  The total power of the led modules inseries should be lower than 80% of the power of the driver, or the power supplywill be burnt up probably,select the suitable thickness of the connecting cablein terms of the quantity of modules, and the connecting points should bewrapped by electrical tape.

Ø  The maximum cascade quantity ofDC12/24V product are 50 pieces in a series(the Power Voltage Supply type of 36VDC and above can be higherquantity in series ), and the brightness of the two ends will be differentbecause of the voltage loss when you increase the quantity of the module.

---

More detail parameters pls contact E-MAIL:Info@ledyyh.com

- See more at: http://www.ledmodules.net/product/1/226.html#sthash.lMqcCCqy.dpuf